Auto Meter 2306 - Manual (Page 2)

Service
For service send your gauge to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is, the year
and model of your vehicle, engine size, etc., and your phone number. If you are sending a gauge back for Warranty adjustment, you must
include a copy (or original) of your sales receipt from the place of purchase.
12 MONTH LIMITED WARRANTY
The manufacturer warrants to the consumer that this product will be free from defects in materials and workmanship for a period of twelve (12) months from the date of the original purchase.
Products that fail within this 12 month warranty period will be repaired or replaced at the manufacturer’s option to the consumer, when determined by the manufacturer that the product failed
because of defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the instrument and the necessary labor done by the manufacturer to affect the
repair or replacement of the instrument. In no event shall this warranty exceed the original purchase price of the instrument, nor shall the manufacturer be responsible for special, incidental
or consequential damages or costs incurred due to failure of this product. Warranty claims to the manufacturer must be transportation prepaid and accompanied with dated proof of purchase.
This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 12 month warranty period. Breaking the
meter seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. The manufacturer disclaims any liability for consequential
damages due to breach of any written or implied warranty on all products made by the manufacturer.
2650-169K 9/30/05
All tachometer in the Auto gage 2300 series work on the
following ignitions:
Chrysler Blue Box Ford Standard Electronic
Chrysler Gold Box MSD (with tach terminal)
Chrysler Silver Box Most other OEM standard CD,
GM HEI and electronic ignitions.
Accel laser I & II, and BEI ignitions are compatible with
the Auto gage 2300 series tachometers when used with
Auto Meter
Model 5215 BEI/Laser Adaptor. Laser II with
date code of 8100 or higher do not require adaptor and
use Figure B for hook-up.
Figure A is for Chrysler Blue
Box, Chrysler Gold Box,
Chrysler Silver Box, Ford
Standard Electronic ignitions,
and most other
OEM Standard,
CD and electronic ignitions.
Figure B is for ignitions that provide
a tach terminal, including
GM HEI,
and MSD (except MSD-5)
Figure C is for
GM HEI ignitions.
Fig. A
Fig. B
Fig. C
WHITE
RED
BLACK
GREEN
BLACK
Coil
Coil
(-)
Coil
GM HEI
(6, 8 CYL.)
Some
(4, 6 CYL.)
GREEN
BLACK
GREEN
BLACK
GREEN
GREEN OR
Grommet In
Firewall
WHITE
RED
BLACK
GREEN
WHITE
RED
BLACK
GREEN
12V Dash Lighting (+)
12V Dash Ignition
Switch (+)
MSD Electric
Ignition
Tach Terminal
Tach Terminal
Good Engine
Ground
Grommet In
Firewall
12V Dash Lighting (+)
12V Dash Ignition
Switch (+)
Grommet In
Firewall
12V Dash
Lighting (+)
12V Dash Ignition
Switch (+)
Good Engine
Ground
Good
Engine
Ground
See Caution & Note to Consumer on other page.
FOR SERVICE SEND TO: AUTO METER PRODUCTS, INC. 413 W. Elm St., Sycamore, IL 60178 (815) 899-0801
© 2005 Auto Meter Products, Inc.
See Caution & Note to Consumer on other page.
See Caution & Note to Consumer on other page.
WARNING
Warranty will be void if connected to coil
when using an aftermarket ignition box
such as, but not limited to products from
the following manufacturers: MSD, Crane,
Jacobs, Mallory, Holley, Etc.. Prior to
installation of your tachometer, check
with the ignition box manufacturer for
recommended tachometer signal location.