Auto Meter 3896 - Manual (Page 2)

power-Up
The pointer will move backward to the stop pin and then move to the zero box, or current pressure reading. This
procedure is an auto-calibration function and is performed on every power-up. While this test is being performed, the
gauge may make a clicking sound. This is normal.
12 MONTH LIMITeD WARRANTY
Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the
original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter’s option to the consumer, when it is determined by Auto Meter Products, Inc. that the product
failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of
the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter
must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in
duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter
Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.
SeRVICe
For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you need the product
back. If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.
FOR SERVICE SEND TO: AUTO MeTeR pRODUCTS, INC. 413 W. elm St., Sycamore, Il 60178 USA (866) 248-6356
Email us at [email protected]
http://www.autometer.com
2650-1481-00rA 05/10/10
CAUTION: If you will be working with the fuel system, take
care to insure no sparks or flames occur.
NOTe: It is recommended that the electrical connections made
in the engine compartment be soldered, and wrapped with
several layers of a good electrical tape.
© 2009 Auto Meter Products, Inc.
The Super Bezel is a registered trademark of Auto Meter Products, Inc.
Wire Color (at sensor)
Brand Year(s) Engine Signal Ground
Purple from Gauge Black from Gauge
Fuel Rail Pressure Sensor
Chevy 2002-2004 Duramax 6.6L
Yellow Orange/Black Chevy 2004-2005 Duramax 6.6L
Chevy 2006-2008 Duramax 6.6L
Chevy 2009 Duramax 6.6L Orange/Black White
Fuel Rail Pressure Sensor
Dodge 2003 Cummins 5.9L Pink/Black
Violet/Red
Dodge 2004-2005 Cummins 5.9L Brown/Yellow
Dodge 2006-2008 Cummins 5.9L Brown/Yellow
Brown/White
Dodge 2007 Cummins 6.7L Brown/Yellow
Dodge 2008 Cummins 6.7L Brown/Yellow Brown/Orange
High Pressure Oil Pressure Sensor
Ford 1994-1996 Powerstroke 7.3L Dark Blue/Light Green
Gray/Red
Ford 1997 Powerstroke 7.3L Light Blue/Red
Ford 1999-2003 Powerstroke 7.3L
Dark Blue/Light Green
Ford 2003-2007 Powerstroke 6.0L
Fuel Rail Pressure Sensor
Ford 2008-2009 Powerstroke 6.4L Green Black