Auto Meter 6390 - Manual (Page 2)

12 MONTH LIMITED WARRANTY
Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the
original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter’s option to the consumer, when it is determined by Auto Meter Products, Inc. that the product
failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of
the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter
must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in
duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter
Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.
SERVICE
For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you
need the product back. If you need it back immediately mark the outside of the box “RUSH REPAIR,” and Auto Meter will service product within two days after receiving it. ($10.00 charge will be
added to the cost of “RUSH REPAIR.”) If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.
FOR SERVICE SEND TO: AUTO METER PRODUCTS, INC. 413 W. Elm St., Sycamore, IL 60178 USA (815) 899-0801
Email us at [email protected]
2650-999 10/10/03 © 2003 Auto Meter, Inc.
Operating Modes
Hold Mode
To select hold mode, press the momentary switch until “HLd” is displayed. Three seconds after the last button press,
“HLd” will disappear, and normal operation will resume, signifying that hold mode has been selected.
When hold mode is selected, amplifier current is measured and displayed 10 times per second. In addition, hold
mode provides an automatic peak hold feature. Each time a peak is reached, the peak value is automatically
displayed for three seconds.
Fast Mode
To select fast mode, press the momentary switch until “FSt” is displayed. Three seconds after the last button press,
“FSt” will disappear, and normal operation will resume, signifying that fast mode has been selected.
When fast mode is selected, amplifier current is measured and displayed 10 times per second.
Slow Mode
To select slow mode, press the momentary switch until “SLO” is displayed. Three seconds after the last button press,
“SLO” will disappear, and normal operation will resume, signifying that slow mode has been selected.
When slow mode is selected, amplifier current is averaged and displayed once per second.