5 wds settings, Wds settings – Atop Technology AW5500 User manual User Manual
Page 40
Atop Industrial Wireless Access Point
AW5500
User Manual V. 1.3
35
4.4.5 WDS Settings
This option is available only when AW5500 is running in the WDS Bridge mode and AW5500
is configured as a WDS Hybrid or a WDS Station, three different encryption types are
available, WEP/TKIP/AES The configuration is relatively simple and straightforward; enter the
Second MAC of the adjacent AW5500, the adjacent AW5500 could be a Root AP or a Hybrid,
Figure 4.15
Note that the Encryption Type here would also be used by the wireless clients connecting to
AW5500 if you are a WDS Root or WDS Hybrid. When TKIP or CCMP (AES) is selected,
AW5500 would use WPA2-PSK authentication for the connecting wireless clients.