APG PG10 user manual User Manual

Page 13

Rev. B, 6/11

PG10

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Decimal Place (dEC PL):
The reading can be set to display in High Resolution (HI RES), Medium
Resolution (MEdRES) or Low Resolution (LO RES) mode. Switching between
resolutions will shift the displayed reading by one decimal place position.

NOTE: Gauges without a decimal place position will display a dummy zero (or
zeros) when the resolution is changed to medium or low.

Options: HI RES (high resolution), MEdRES (medium resolution) or LO RES
(low resolution)

Setting the Decimal Place feature:

Step 1: Press to enter the main setup menu.

Step 2: Press or to cycle through the options until AdVSET is

displayed.

Step 3: Press to enter the Advanced Settings menu.

Step 4: Press or to cycle through the options until dEC PL is

displayed.

Step 5: Press to access the Decimal Place setting options.

Step 6: Press or to cycle through the resolution settings.

Step 7: Press to apply the displayed setting and return to advanced setup

menu.

Step 8: To exit the advanced setup menu, press or until EXIT is

displayed and press to exit to the main setup menu.

MODE

ENTR