APG PG10 user manual - Manual (Page 12)

PG10 Rev. B, 6/11
12
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• Advanced Settings (AdVSET):
The Advanced Settings menu is used to customize the LCD display and to setup
any optional features, such as an analog output.
Auto-Off (AUTO):
This function is applicable to battery powered units only. The Auto-Off feature
allows the user to designate the time of inactivity (no buttons pushed) until the
gauge automatically powers down.
Options: OFF, 2 MIN, 4 MIN, 8 MIN, 16 MIN, 32 MIN and LIGHT
NOTE 1: Selecting OFF disables the Auto-Off feature; the gauge will then
remain powered indefi nitely so long as suffi cient voltage is being supplied
(>1.8V).
NOTE 2: Selecting LIGHT will keep the gauge continuously powered as
long as the light sensor in the PG10 detects adequate light levels. When the
environment is suffi ciently dark, the PG10 will automatically shut down until
the lighting once again reaches the threshold of the light sensor.
Setting the Auto-Off feature:
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the menu options until AdVSET is
displayed.
Step 3: Press to enter the Advanced Settings menu.
Step 4: Press or to cycle through the menu options until AUTO is
displayed.
Step 5: Press to access the Auto-Off setting options.
Step 6: Press or to cycle through setting options until the desired
setting is displayed.
Step 7: Press to apply the setting and return to advanced setup menu.
Step 8: To exit the advanced setup menu, press or until EXIT is
displayed and press to exit to the main setup menu.
MODE
ENTR
ENTR
ENTR
ENTR