Peak-hold (p hold) – APG PG10 user manual User Manual

Page 11

Rev. B, 6/11

PG10

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

• Peak-Hold (P HOLd):

When the Peak-Hold is enabled, the gauge will display the “peak” or maximum
pressure reading since the gauge was powered on or the Max/Min value was
reset.

NOTE 1: When the Peak-Hold feature is enabled, the icon will be
displayed in the upper left area of the display.

Options: Off or On

Enabling the Peak-Hold feature:

Step 1: Press to enter the main setup menu.

Step 2: Press or to cycle through the options until P HOLd is displayed.

Step 3: Press to access the Peak-Hold setting options.

Step 4: Press or to toggle between OFF and ON.

Step 5: Press to apply the displayed setting and return to main setup menu.

NOTE 2: The peak value can be reset by pressing

MODE

ENTR

PEAK