Anchor NAVI-TRAC 30 WIDE GABLE-END - Manual (Page 11)

SECURING THE 1st VERTICAL BEAM
ERECTING THE 2nd BEAM
ON THE LEADING 2-PC SAFETY WEBS,
WORKERS INSERT LOOSE ENDS OF UPPER
SAFETY WEBS INTO THE RATCHETS OF
THE LOWER SAFETY WEBS.
WITH 2nd BEAM SECURED, THE 1st BEAM
IS ROTATED TOWARD IT. 2 OR 3 WORK-
ERS SHOULD HOLD THE BEAM AT VERTICAL
UNTIL EAVE BARS (ER20) ARE INSTALLED.
USING RATCHETS, ADJUST LEADING AND TRAIL-
ING SAFETY WEBS AGAINST EACH OTHER ON BOTH
SIDES OF THE STRUCTURE TO SECURE AND VERTI-
CALLY ALIGN THE BEAM.
11
SECURING THE 2nd BEAM WITH DROP-IN RIDGE/EAVE BARS
DROP-IN RIDGE/EAVE BARS CON-
NECT 1st AND 2nd BEAMS. DROP
ONE HOOK END OF BAR INTO EAVE
FITTING. USE LIFTING CRADLES TO
POSITION 2nd END.