Allen&Heath GS3000 - Manual (Page 4)

GS3000 U SER G UIDE 4
I
NTRODUCTION
The GS3000 continues ALLEN & HEATH’s commitment to provide high quality audio mixing consoles
engineered to meet the exacting requirements of today’s audio business. It brings you the latest in high
performance technology and offers the reassurance of over two decades of console manufacture and
customer support.
This user guide presents a quick reference to the function and application of the GS3000. We
recommend that you read this guide fully before starting. For further information on the basic principles of
recording and audio system engineering, please refer to one of the specialist publications available from
book shops and audio equipment dealers.
Whilst we believe the information in this guide to be reliable, we do not assume responsibility for
inaccuracies. We also reserve the right to make changes in the interest of further product development.
S ERVICE A ND T ECHNICAL S UPPORT
We are able to offer further product support through our world-wide network of approved dealers and
service agents. You can also access our Web site on the internet for information on our product range,
assistance with your technical queries or simply to chat about audio matters. To help us provide the most
efficient service please keep a record of the console serial number, and date and place of purchase to be
quoted in any communication regarding this product.
G ENERAL P RECAUTIONS
Your GS3000 is ruggedly constructed to give many years of reliable operation. However, you will extend
the life of the console and preserve its cosmetics by applying these simple common sense precautions.
Avoid storing or using the mixing console in conditions of excessive heat or cold, or in positions where it
is likely to be subject to vibration, dust, dirt or moisture. Do not use any liquids to clean the control
surface of the console, a soft dry brush or dry lint-free cloth is ideal. Use only water or ethyl alcohol to
clean the trim and scribble strips. Other solvents may cause damage to paint or plastic parts.
The faders, switches and potentiometers are lubricated for life. The use of electrical lubricants on these
parts is not recommended.
Avoid using the console close to strong sources of electromagnetic radiation (e.g. video monitors, high
power electric cabling): this may cause degradation of the audio quality due to induced voltages in
connecting leads and chassis. For the same reason, always site the power supply away from the unit.
T RANSPORTING T HE C ONSOLE
The console is supplied in a strong carton. If it is necessary to move it any distance after installation it is
recommended that this packing is used to protect it. Be sure to disconnect all cabling before moving the
console. If the console is to be regularly moved we recommend that it is installed in a foamlined
flightcase. At all times avoid applying excessive force to any knobs, switches or connectors.
SAFETY WARNING!
Mains electricity is dangerous and can kill. Mains voltage is
present within the console power supply.
Do not remove the power supply cover with mains electricity
connected. To ensure your safety, mains earth is connected to
the chassis through the power lead. Do not remove this mains
earth connection.
To avoid the risk of fire, replace the mains fuse only with the
correct value and type as indicated on the power supply unit.