Allen&Heath GS3000 User Manual
Page 27
GS3000
U
SER
G
UIDE
27
Store a Mute Patch
Select the mutes to be saved in a patch. i.e. Mute LEDs on.
Press
or
to the required patch number.
Press the STORE switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the RECALL switch to overwrite the patch.
The RECALL LED will flash once and the STORE LED will turn off.
The patch is now saved.
Recall a Mute Patch
Press
or
to the required patch number.
Press the RECALL switch to select the patch.
The ACTIVE PATCH LED will illuminate.
If a console mute is pressed then the ACTIVE PATCH LED will turn off as the
console mutes are not the same as the stored patch.
If the ACTIVE PATCH LED flashes, then the patch number displayed is not
the last patch recalled.
The ALL Patch
Between patch
127
and
0
is a special patch function called
ALL
.
This lets you overwrite all 128 patches with the current console mute settings.
You would normally do this before programming the patches for a new
recording session.
Typical applications would be:
Turn all mutes off in all patches (clear), then edit the mutes on for required
channels.
Turn all mutes on in all patches (set), then edit the mutes off for required
channels.
Turn unused channel mutes on before editing the used channels.
Turn mostly muted channel mutes on before editing the patches where they
are not muted.
Note that the ALL function overwrites all 128 patches and should be
used with care. A confirm function is included to prevent accidental
operation.
Overwrite All 128 Patches
Operate the mutes to set up the console as required. You may wish to start by
clearing or setting all mutes as described previously.
Press
or
until the
ALL
patch is displayed.
Press the STORE switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the RECALL switch. The RECALL switch flashes only.
The STORE LED will flash.
Press the RECALL switch again to confirm the all patch overwrite.
The RECALL will flash once. The patch is now saved.
PATCH
CHANNEL
AUTO
MIDI
ACTIVE
AUTO
MIDI CH
CLR ALL
DUMP
SHIFT
INCREMENT
HOLD FOR SHIFT FUNCTION