Allen&Heath GS3000 - Manual (Page 22)

GS3000 U SER G UIDE 22
T
URN
A
LL
C
ONSOLE
M
UTES
O
FF OR
O
N
It is often useful to turn off (clear) all the console mutes or to turn them on (set). You may wish to clear
the console before starting a new scene or setting up a new group or patch. Alternatively you could set
all mutes on and work with just the active channels. Once ’cleared’ or ‘set’ in this way you can overwrite
and edit selected groups and patches, or all 128 patches using the 'ALL' function as a starting point for a
new show.
Turn All Console Mutes Off
Press the SHIFT + RECALL switches.
The red LED will start flashing.
The display flashes CLr
Press any other key to cancel
or
Press the RECALL switch to confirm.
The LED will turn off.
All console mutes will turn off.
Turn All Console Mutes On
Press the SHIFT + RECALL switches.
The red LED will start flashing.
The display flashes CLr
Press the SHIFT + RECALL switch again.
The display flashes SEt
Press any other key to cancel
or
Press the RECALL switch to confirm.
The LED will turn off.
All console mutes will turn on.
PATCH CHANNEL
AUTO
MIDI ACTIVE
AUTO
MIDI CH
CLR ALL
DUMP
SHIFT
INCREMENT
HOLD FOR SHIFT FUNCTION