AirLive WT-2000ARM - Manual (Page 59)

AirLive WT-2000ARM User’s Manual
54
Step 1: Click “Start” and select “Run”.
Step 2: Type in “cmd” and click “OK”.
Step 3: Type ipconfig /all and click enter.
z Your PC’s IP address is 192.168.2.111.
z The PC’s Subnet Mask is 255.255.255.0.
z Your PC’s MAC Address is the one entitled Physical Address (00-00-E2-82-C3-AD).
4. I forget my login username and/or password.
STEPS CORRECTIVE ACTION
1 If you have changed the password and have now forgotten it, you will need to
upload the default configuration file. This will erase all custom configurations
and restore all of the factory defaults including the password.
2 Press the Reset button for five seconds, and then release it. When the LAN
LED begins to blink, the defaults have been restored.
3 The default username is “admin”. The default password is “1234”. The
Password and Username fields are case-sensitive. Make sure that you enter
the correct password and username using the proper casing.
4 It is highly recommended to change the default username and password.