AirLive WT-2000ARM - Manual (Page 20)

AirLive WT-2000ARM User’s Manual
15
Windows 95/98/Me
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will
appear.
2. Double-click Network icon. The Network window will appear.
3. Check your list of Network Components. If TCP/IP is not installed, click the Add button to install it
now. If TCP/IP is installed, go to step 6.
4. In the Network Component Type dialog box, select Protocol and click Add button.
5. In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the OK
button to start installing the TCP/IP protocol. You may need your Windows CD to complete the
installation.
6. After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of Network
Components and then click the Properties button.
7. Check each of the tabs and verify the following settings:
Bindings: Check Client for Microsoft Networks and File and printer sharing for Microsoft
Networks.
Gateway: All fields are blank.
DNS Configuration: Select Disable DNS.
WINS Configuration: Select Disable WINS Resolution.
IP Address: Select Obtain IP address automatically.
8. Reboot the PC. Your PC will now obtain an IP address automatically from your router’s DHCP
server.