AirLive WN-350R - Manual (Page 95)

2. System and Network Setup
WN-350R User’s Manual 86
Channel Number (4): Select the channel you want to use, all the wireless
routers must use the same setting.
Associated Clients (5):Click ‘Show Active Clients’ button, then an “Active
Wireless Client Table” will pop up. You can see the
status of all active wireless stations that are connecting
to the access point.
MAC address Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security Setting (10): Click to set security settings for this connection (Please
go to section ‘2-7-3 Wireless Security’ for detailed
instructions).
2.7.1.6. Setup Procedure for ‘Universal Repeater’
In this mode, the router can act as a wireless repeater; it can be Station and AP
at the same time. It can use Station function to connect to a Root AP and use
AP function to service all wireless stations within its coverage.
NOTE: For Repeater Mode, this router will demodulate the received
signal, checking if this signal is noise for the operating network then
have the signal modulated and amplified again. The output power of
this mode is the same as that of WDS and normal AP mode.