AirLive WN-350R - Manual (Page 120)

3. Advanced Functions
111 WN-350R User’s Manual
Local IP Address (c): Specify the local (source) IP address that will be
affected by this rule. Please input thestarting IP address
in the left field, and input the end IP address in the right
field to define a range of IP addresses, or just input the
IP address in the left field to define a single IP address.
Local Port Range (d): Please input the range of local (source) port number
that will be affected by this rule. If you want to apply this
rule on port 80 to 90, please input ’80-90’; if you want to
apply this rule on a single port, just input the port
number, like ‘80’.
Remote IP Specify the remote (destination) IP address
Address (e): that will be affected by this rule. Please input the
starting IP address in the left field, and input the end IP
address in the right field to define a range of IP
addresses, or just input the IP address in the left field to
define a single IP address.
Remote Port Please input the range of remote (destination)
Range (f): port number that will be affected by this rule. If you want
to apply this rule on port 80 to 90, please input ’80-90’; if
you want to apply this rule on a single port, just input the
port number, like ‘80’. If the remote (destination) IP
address and /or port number is universal, just leave it
blank.
Traffic Type (g): Please select the traffic type of this rule, available
options are None, SMTP, HTTP, POP3, and FTP. You
can select a specific traffic type for this rule, if you want
to make this rule as a IP address based rule (apply the
limitation on all traffics from / to the specified IP address
/ port number), select ‘None’.