AirLive WN-350R User Manual

Page 91

2. System and Network Setup

WN-350R User’s Manual

Here are descriptions of every setup items:

Band (2):

Select the band you want to use.

SSID (3):

This is the name of wireless network. You can type the

SSID of the network you would like to connect here.

Site Survey (4):

When you use this wireless router as a wireless station

for Ethernet network device to have wireless capability,

you have to associate it with a working access point.

Click ‘Select Site Survey’ button, then a “Wireless Site

Survey Table” will pop up. It will list all available access

points near by. You can select one access point in the

table and it will join wireless LAN through this access

point.

2.7.1.3. Setup Procedure for ‘AP Bridge-Point to Point’

In this mode, you can connect your wireless router with another, to combine

two access points and expand the scope of wireless network, and all clients

(wired only – AP will not accept wireless clients in this mode) of two wireless

routers will think they’re on the same physical network. This function is very

convenient when you need to connect two networks between two buildings.

Here are instructions about how to connect two wireless routers together: