AirLive WN-350R - Manual (Page 143)

3. Advanced Functions
WN-350R User’s Manual 134
Here are descriptions of every setup items:
Client PC Please input any text to describe this IP address, up to
Description (a): 16 alphanumerical characters.
Client PC IP Please input the starting IP address in the left field, and
address (b): input the end IP address in the right field to define a
range of IP addresses, or just input the IP address in
the left field to define a single IP address.
Client PC Please check all services you want to allow or deny this
Service (c): IP address to use, you can check multiple services.
Protocol (d): If the service you need is not listed above, you can
create a new service on your own. Please select TCP or
UDP, if you’re not sure, please select ‘Both’.
Port Range (e): Please input the port range of new service here. If you
want to specify port 80 to 90, please input ’80-90’; if you
want to apply this rule on a single port, just input the
port number, like ‘80’.
Add (f): When you finish with all settings, please click ‘Add’ to
save settings, you’ll be brought back to previous menu,
and the rule you just set will appear in current IP filtering
table.
If you want to remove all settings in this page, click ‘Reset’ button.