AirLive WN-350R User Manual
Page 53
2. System and Network Setup
WN-350R User’s Manual
44
Here are descriptions of every setup items:
Host Address (1): Input the IP address of the remote host you wish to initiate
a management access.
Port (2):
You can define the port number this router should expect
an incoming request. If you’re providing a web service
(default port number is 80), you should try to use other
port number. You can use the default port setting ‘8080’,
or something like ‘32245’ or ‘1429’. (Any integer between
1 and 65534)
Enabled (3): Select the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the following
message displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.