AirLive WN-350R - Manual (Page 18)

2. System and Network Setup
9 WN-350R User’s Manual
3. Connect the A/C power adapter to the wall socket, and then connect it to
the ‘Power’ socket of the router.
4. Please check all LEDs on the front panel. ‘PWR’ LED should be steadily
on, WAN and LAN LEDs should be on if the computer / network device
connected to the respective port of the router is powered on and correctly
connected. If PWD LED is not on, or any LED you expected is not on,
please recheck the cabling, or jump to ‘4.2. Troubleshooting’ for possible
reasons and solution.