AirLive WH-5000A - Manual (Page 62)

59 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
Chapter 13: Technical Support
Manufacturer’s Statement
The WH-5000A is provided with warranty. It is not desired or expected that the user
open the device. If malfunction is experienced and all external causes are eliminated, the user
should return the unit to the manufacturer and replace it with a functioning unit.
If you are experiencing trouble with this unit, the point of contact is: your
manufacturer or sales representative.
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the Federal Communications Commission’s Rules and Regulations. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may came
harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense-
Installation should be accomplished using the authorized cables and/or connectors provided with the device
or available from the manufacturer/distributor for use with this device. Changes or
modifications not expressly approved by the manufacturer or party responsible for this FCC compliance
could void the user authority to operate thee equipment.
Channel Separation and WLAN Cards
There are two WLAN cards in this device. One is used for the Access Point function; the other is used for the
Bridge. Channel Separation is required to reduce interference between the AP and Bridge WLAN cards. We
have found that assigning 11 to the AP and 4to the Bridge has given the optimum channel separation in test
installations.