AirLive WH-5000A - Manual (Page 22)

19 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
` Dynamic IP
You also can choose “Using DHCP to get an IP address”. By this way, the WH-5000A will get an IP address
from
DHCP server.
Dynamic IP
!
Note: If DHCP is selected, a new IP address would be given to the AirLive WH-5000A unit after clicking
Apply. To
log into to unit and keep setting it up, the new IP address needs to be obtained
from your
Network Administrator. There are two ways to obtain the new IP address:
1. Using WH-5000A embedded Remote Logging function. Set up “Remote Logging” before
setting up WAN using DHCP to obtain new IP address. Remote logging allows you to
forward the syslog data from each machine to a central remote logging server. Thus, you
can get new IP from logging server. Please refer to Chapter 11.3 to get more detail
information.
2. Using “Wireless Node Discovering Tool” that is provided by Ovislink and put in CD-ROM.
This program will discover the IP of Ovislink AP products. Please refer to Appendix B to
understand how to install it.
Click Apply to accept changes.