AirLive WH-5000A - Manual (Page 13)

10 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
` 802.11a
- Frequency band
` 5.25 ~ 5.35GHz/5.725 ~ 5.825GHz
!
Note: Frequency band setting will vary according to individual country regulations.
- Data rate:
` 6, 9, 12, 18, 24, 36,48, 54 Mbps
` 72, 96, 108 Mbps (Super A mode)
- Modulation:
` Orthogonal Frequency Divisional Multiplexing (OFDM)
` BPSK at 6 and 9 Mbps
` QPSK at 12 and 18 Mbps
` 16-quadrature amplitude modulation (QAM) at 24 and 36Mbps
` 64-QAM at 48 and 54Mbps
- Transmit Output Power (Typical):
` 18 dBm at 6 ~ 24Mbps
` 16 dBm at 36Mbps
` 15 dBm at 48Mbps
` 14 dBm at 54Mbps
!
Note: Maximum power setting will vary according to individual country regulations.
- Receive Sensitivity (Typical):
n -84dBm at 6Mbps
n -70dBm at 48Mbps
n -68dBm at 54Mbps
1.7 LED indicator definition
LED Description
Power
If this light is on, the unit is on;
If it is not on, the unit is off
WAN
If this light is on, the unit is connected to network
If it is off, the unit does not have an active connection to network
WLAN
The light is on for indicate the WLAN is active.
The light is blinking to indicates data transmission
1. LED blink slowly (every 1 second): there is a connection and signal quality is poor
2. LED blink fast: there is a connection, and the signal quality is good
3. LED steady: there is connection, and the signal quality is excellent
1.8 Operation Temperature
` 0 degree ~ 50 degree C