AirLive WH-5000A - Manual (Page 16)

13 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
2.2 Computer’s IP setting
Plug one end of a CAT5 Ethernet cable to the RJ45 connector of the WH-5000A and the
other end to the Ethernet port on your computer. In order to connect properly to the AirLive WH-5000A
on the WAN port, the TCP/IP parameters on your laptop/PC must be set to a static IP address. Go to
your network connection settings and modify your laptop/PC’s LAN connection TCP/IP properties.
Set the IP address and subnet mask. The IP address can be in the range of 192.168.254.xxx, where xxx can be
from 2 to 199.
Now you can open a browser and connect to the AirLive WH-5000A to begin configuring the unit.
2.3 Login
On your computer, pull up a browser window and put the default URL https://192.168.254.254
for the WH-5000A in the address line.
!
Note:
Be sure that you use the https prefix,
not http
The Login window appears.