AirLive WH-5000A - Manual (Page 23)

20 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
Chapter 4: Wireless Access Point Configuration
This chapter describes the items about set up AP function. Those items are under the Wireless Access Point
Configuration menu. If you don’t know how to enter configuration screen, chapter 2 describes how to do it.
Please keep in mind that you need click Apply to save all settings.
The following screens are available in AP mode:
• Wireless Access Point
– General
– Security
– MAC Address Filtering
– Rogue AP Detection
– Advanced
• Service Settings
– DHCP Server
• Monitoring/Reports
– Wireless Clients
– Adjacent AP List
– DHCP Client List
4.1 Select Operation Mode
The default operation mode is Client mode. You can select Wireless Access Point mode at System
Configuration – Operation mode to switch to AP mode.
Click the entry on the left hand navigation panel for System Configuration – Operation Mode. This directs
you to the System Configuration – Operation Mode. Select the radio of Wireless Access Point and press
Apply button. The device will
Be reboot and then
change the operation mode as AP
function.
Note that if you change
modes your configuration will be
lost.