Wh-5000a serials user guide, Chapter 3: system configuration, 1 system configuration – general – AirLive WH-5000A User Manual
Page 20

17 AirLive WH-5000A User’s Manual
WH-5000A Serials User Guide
Chapter 3: System Configuration
The chapter describes how to do System Configuration. If you don’t know how to enter configuration screen,
chapter 2 describes how to do it.
There are three options under System Configuration:
•
General
•
Operating Mode
•
WAN
Each screen is described in detail in the following subsections.
3.1 System Configuration – General
Click the entry on the left hand navigation panel for enter System Configuration -General. This directs you
to the System Configuration – General page.
This screen lists the software version number for your WH-5000A and allows you to set the Host Name
and
Domain Name as well as establish
system date and time.
` Description:
` Host and Domain Name: Both
set at
the
` System Time: You can manual
key in
the
WH-5000A is with RTC chip to
keep date and time data. It can
keep system date and time data for
5 days.
!
Note:
The
Crypto Officer
is the only
system date must be set to a date after 01/01/2005.
user who can set the date and time. The
` Login Banner: You can modify the terms and conditions login banner on the login screen. The default is
"This device is for authorized use only. Any unauthorized use of this product is prohibited."
When you are satisfied with your changes, click Apply.