AirLive POE-FSH2422G-390 - Manual (Page 44)

4. Web Management
AirLive POE-FSH2422G-390 User’s Manual 39
4.30 Spanning Tree
There are many management functions can be set or performed if you click the
Spanning Tree on Home Page, including:
„ STP Bridge Settings
„ STP Port Settings
„ Loopback Detection Settings
In the following sessions, we will talk in detail about the management functions under the
Spanning Tree menu.
4.31 STP Bridge Settings (Spanning Tree)
„ Bridge Priority: This parameter configures the spanning tree priority globally for this
switch. The device with the highest priority becomes the STP root device. However, if
all devices have the same priority, the device with the lowest MAC address will then
become the root device. Number between 0 - 61440 in increments of 4096. Therefore,
there are 16 distinct values.
„ Hello Time: Interval (in seconds) at which the root device transmits a configuration
message (BPDU frame). Number between 1-10 (default is 2).