AirLive POE-FSH2422G-390 - Manual (Page 31)

4. Web Management
AirLive POE-FSH2422G-390 User’s Manual
26
„ Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex mode.
„ Backpressure: Flow Control for connection at speed of 10/100Mbps in Half-duplex
mode.
„ TX/RX Capability: When the Auto-Negotiation column is set as Disable, users have to
set this column as Enable or Disable.
„ Addr. Learning: When the Auto-Negotiation column is set as Disable, users have to set
this column as Enable or Disable.
„ Select Port No.: Tick the check boxes beside the port numbers being set.
„ Click Update to have the configuration take effect.
„ Current Status: Displays current port status.
„ Setting Status: Displays current status.
Click Update to make the configuration effective
4.13 Port Mirroring (Port Management menu)
The Port mirroring is a method for monitoring traffic in switched networks. That Traffic
through ports can be monitored by any of the ports means traffic goes in or out monitored
(source) ports will be duplicated into mirroring (destination) port.
„ Destination (mirroring) port for monitoring RX only, TX only or both RX and TX traffic
which come from the source port. Users can connect the mirroring port to LAN analyzer
or Netxray.
„ Monitored Packets: Pull down the selection menu to choose what kind of packet is to be
monitored.