AirLive POE-FSH2422G-390 - Manual (Page 24)

4. Web Management
AirLive POE-FSH2422G-390 User’s Manual 19
If you have an IP sharing router in the network, you can open a virtual server on the router
to allow the switch to be managed through Internet. This method is more recommended as
the broadband router provide natural fire wall protector from hackers.
In the diagram above, the router has the WAN (given by the ISP) port IP address
“201.100.1.5” and LAN port address “192.168.0.254”. The switch’s IP is “192.168.0.200”.
Please follow the instruction below to setup the router and switch for remote access:
On the Switch
„ On the IP setting, set the gateway to Router’s LAN port address 192.168.0.254
„ Please make sure the subnet mask is the same as the router’s.
„ On the Router
„ Go to router’s Virtual Server setting and open the Web port (TCP Port 80) to the
switch’s IP address 192.168.0.200
„ If your router require enter the beginning and ending Port (from PortX to PortX), enter
80 for both.
Now the Remote PC will be able to access your switch by entering “201.100.1.5” in the
Web browser’s address field.
4.3 Get into the Web Management
After you have properly configure the computer and switch’s IP, you can get into the web
management by the following steps:
Step 1
Open the Internet Explorer
Step 2
Enter the switch’s IP address in the Address field and press enter.
Step 3
When prompt for User’s name and Password, enter the following information:
User’s Name: admin
Password: airlive