AirLive POE-FSH2422G-390 - Manual (Page 17)

2. Installation of the Switch
AirLive POE-FSH2422G-390 User’s Manual
12
10 /100Base-TX and 1000Base-TPorts
Interface RJ-45
Specification
Connection
Cable to Use
Straight-through twisted-pair cable To an end station
Straight-through twisted-pair cable To a hub/switch
100 meters Maximum Distance
Cabling type for 10/100BASE-TX and 1000Base-T
2.7 Connecting to Power
POE-FSH2422G-390 PoE Switch features a universal auto-select power supply unit, which
allows a power connection to a wide range of input voltages from 100 to 240VAC @ 50 ~
60Hz.
To establish its power connection, simply plug the female end of the power cord into the
power connector on the rear of the switch and the male end of the power cord into a
suitable power outlet. Once you have correctly plugged in the power, you can then turn on
the Power Switch to activate the switch.
2.8 Reset to Default
When you forgot your IP or password, please use the reset button for the factory default
setting? Please take the following steps to reset the Web Smart Switch back to the original
default:
Step 1
Turn on the POE-FSH2422G-390 PoE Switch.
Step 2
Press and hold the reset button continuously for 5 seconds and release the reset
button.
Step 3
The switch will reboot for 20 seconds and the configuration of switch will back to the
default setting.