AirLive POE-FSH2422G-390 - Manual (Page 41)

4. Web Management
AirLive POE-FSH2422G-390 User’s Manual
36
„ All-high-before-low (Strict priority): All packets will be assigned to either high priority
queue (Queue 2) or low priority queue (Queue 1). The packet on the low priority queue
will not be forwarded until the high priority queue is empty.
„ WRR mode: There are 4 priority queues for Weighted-and-round-robin (WRR) mode.
When this mode is selected, the traffic will be forwarded according to the number set in
each queue.
4.25 Port, 802.1p, IP/DS based (QoS Setting)
4.26 TCP/UDP Port Based (QoS Setting)
The user can select the protocol that will be forwarded as the specified mode. There are 3
user-defined UDP/TCP port groups and many well-known TCP/UDP ports. The
user-defined port number may be a range or a specific number, depending on the mask.
The operating theory for all 4 CoS types can be illustrated by the following figure and table.
TCP/UDP CoS is a global setting for all ports and has no connection with the physical port.
Other CoS types have a connection with the physical port.