AirLive N.MINI - Manual (Page 53)

4. Web Configuration
AirLive N.MINI User’s Manual 46
4.4 Firewall
4.4.1 Port Filtering
Enable Port Filtering Check to enable Port Filtering function.
Port Range Enter the beginning of the range of port numbers used by the
service. If the service uses a single port number, enter it in both
the start and finish fields.
Protocol Select the protocol (TCP, UDP or Both) used to the remote
system or service.
Comment You may key in a description MAC address.
Apply Changes After completing the settings on this page, click Apply Changes
button to save the settings.
Reset Click Reset button to restore to default values.
Current Filter Table Shows the current Port Forwarding information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset Click Reset button to rest.