AirLive N.MINI - Manual (Page 10)

1. Introduction
AirLive N.MINI User’s Manual 3
WPS button
Press the physical WPS button on the Wireless Router once, or go
to enable the WPS function via web configuration (Go to Wireless >
WPS page), then the LED will start to flash. Please make a
connection with other WPS supported device within 2 minutes.
LED Behavior
LED Printed Color Behavior Indication
POWER PWR Green
Off Power off
On Power on
Blinking Power saving mode starting
System SYS Green
On Press reset button two seconds
the LED will on, keep on pressing
more than 3-5 seconds, the LED
will start to flash
Blinking System CPU is busy
Wireless
LAN
WLAN Green
Off WLAN function off
On WLAN link / active
Blinking WLAN traffic transmitting
WPS WPS Green
Off WPS Off
On WPS active and connected
Blinking WPS is enabled to make a
connection
Ethernet Ethernet Green
Off No Ethernet cable connecting
On Ethernet cable connected
Blinking Receiving/ sending data