AirLive IAR-5000 v2 - Manual (Page 51)

6. Authentication
AirLive IAR-5000 User’s Manual 46
The device supports four types of authentication: RADIUS, POP3, LDAP and the device’s
inbuilt user authentication. The IT administrator may regulate users’ Internet access using
these authentication mechanisms.
6.1 Settings
Authentication Settings:
„ Authentication Port: The port number used for authentication mechanism. It is “82”
by default.
„ Log users off if idle for: You can specify a period of time to log off idle users. If the
idle time of a user has exceeded the value specified, the authentication of the user will
automatically expire. Default value is “30”.
„ Disable multiple logins using the same authentication name: Users will fail to be
authenticated if using the same name.
„ Automatically direct the authentication user to the web page: Users will be taken
to the web page specified right after authentication. If leaving the field blank, users will
have direct access to their desirable web page.
„ The message to display on the authentication window: The informative or greeting
message (support HTML language) for authenticated users. To discard the setting and
leave the field blank.
„ Authentication-Free List: Users can be exempted from the authentication
mechanism by specifying their IP addresses on the list.
Procedure to pass Authentication:
„ Define the Authentication settings. (Figure 6-1)
Figure 6-1 General Authentication Settings
6
6.
Authentication