AirLive G.DUO - Manual (Page 63)

6. Client + AP Mode
AirLive G.DUO User’s Manual 56
Preamble is intended for applications where minimum overhead and maximum
performance is desired. If in a "noisy" network environment, the performance will be
decreased.
„ IAPP: IAPP (Inter Access Point Protocol) is designed for the enforcement of unique
association throughout a ESS (Extended Service Set) and a secure exchange of
station’s security context between current access point (AP) and new AP during
handoff period.
„ BG Protection: The 802.11g standard includes a protection mechanism to ensure mixed 802.11b
and 802.11g operation. If there is no such kind of mechanism exists, the two kinds of standards may
mutually interfere and decrease network’s performance. .
„ Hide SSID: Enable Hide SSID will make the AP network’s SSID invisible. A device
can link with the AP only if correct SSID name is entered.
„ TX Power Level: You can set your TX Output power level here. Please note the
maximum allowable TX output power in EU is 20dBm. Please do not exceed your
country’s legal limit.
6.2.4 Site Survey
Operation Mode -> Setup -> Site Survey
You can scan for wireless networks around your location using the Site Survey function.
From the site survey function, you can also perform antenna alignment and establish
wireless connection
When you click on Site Survey, the following screen will appear. It might take awhile
depending on number of available APs in the area.
d
Click here to select
SSID for Association
or Signal Survey
To connect with the
selected SSID. This
function is available only
in Client Infrastructure or
Bridge Infrastructure
For antenna
alignment. It will
display and update
the Signal Strength
conitnously