7 virtual server settings 4.3.8 dmz – AirLive G.DUO User Manual

Page 39

4. WISP + AP Mode

AirLive G.DUO User’s Manual

Clone MAC Address: In this place, you can assign a MAC address for the WAN

port. In case of WISP mode, it is Radio1’s MAC address. For Gatway mode, it

is the WAN/LAN1 MAC address.

Enable UPnP: Check this field will enable Universal Plug n Play protocol

Enable Web Server Access on WAN: Check this field will enable remote

management from WAN side.

4.3.7 Virtual Server Settings

Virtual server allows you to specify one or more applications running on server computers

on the LAN that may be accessed by any Internet user. Internet data destined for the

specified public port will be directed to the specified private port number on the LAN client

with the specified private IP address.

If you want to allow your web server, ftp server, or email server to be accessible from

Internet, you would need to open specific port on the virtual server to your local IP address.

For a list of most frequent used TCP and UDP ports. Please visit

4.3.8 DMZ

Advanced Settings >> Multiple DMZ
DMZ opens all TCP/UDP ports to particular IP address on the LAN side. It allows setting

up servers behind the G.DUO.