AirLive G.DUO - Manual (Page 17)

2. Install the G.DUO
AirLive G.DUO User’s Manual 10
2.5 LED Table
This section describes the LED behavior of G.DUO. You can find the LED on the top side
of the G.DUO.
Power
Steady Blue – Normal Operation
OFF – No Power
RF1, RF2
Slow Flashing : Radio is active
Fast Flashing: Transmitting Data
OFF: Radio Disabled
LAN1 ~4, WAN
Steady Blue : Link established
Fast Flashing: Transmitting Data
OFF: No Link
2.6 Restore Settings to Default
If you have forgotten your G.DUO’s IP address or password, you can restore your G.DUO
to the default settings by pressing on the “reset button” for more than 5 seconds. You
might need a pen or pencil for this operation. The reset button is inside the bottom case.
Please see diagram below for details.