AiM MyChron4 User manual - Manual (Page 23)

MyChron4
User Manual
Release 1.03
www.aim-sportline.com – www.mychron4.com 23
9 – MyChron4 firmware upgrading (firmup)
MyChron4, like all AIM loggers, is always improving and can be easily upgraded
following this procedure:
• connect
to www.aim-sportline.com or to www.mychron4.com website
• select download area and firmware section
• click on firmware MyChron4
• select “save” option and downloaded firmware destination folder
• connect
Data key to the PC USB port and run the firmup
• press
“run” button
• the window here below appears
It shows: top left (1) firmware versions included in the run firmup, top right (2)
firmware versions at present installed in Data key.
Bottom: possible updating options. To upgrade MyChron4 firmware select the first
option, green circled: Data key updates the firmware of MyChron4. The system ask
for confirmation. Press “Yes”
Note: firmware upgrading deletes data stored in Data key.
Firmware upgrading procedure will start: the waiting bar shows upgrading status and
a text informs the user on which step is in course as shown below.