AiM MyChron4 User manual - Manual (Page 11)

MyChron4
User Manual
Release 1.03
www.aim-sportline.com – www.mychron4.com 11
6 – MyChron4 configuration and wizard
To enter configuration menu press MENU button. The first configuration is made
trough the Wizard, a sort of tutorial menu that allows the user to quickly configure all
needed parameters.
Warning: the Wizard has to be completed at least once or it will re-start at the first
switch on.
Wizard steps are:
• Language
• Pilot
name
• Drive Setup (in case of gearbox set the number of gears)
• Temperature unit of measure (Fahrenheit – Celsius)
• RPM max value
• RPM
tattle
• M4 Temp 1 Alarm
• Adjust
Hour/date
Almost all Wizard steps are extremely intuitive and do not require a particular
explanation, except, may be, “Drive Setup”:
• Direct drive: used in karts without clutch, like classical Formula and ICA;
• Low stall clutch: used in Rotax Max, TAG, JICA, HPV, Comer, and in most
4 strokes engines
• Gearbox: in case this drive type is selected the user is required to insert the
number of gears.
Note 1: the engaged gear number is shown on the display only if MyChron4 is
connected to eBox that, managing speed signal, allows to compute the engaged
gear using the proper algorithm (based on RPM and speed).
Note 2: in case of gearbox and direct drive type “predictive” option won’t be
available.