AiM MyChron4 User manual User Manual
Page 14
MyChron4
User Manual
Release 1.03
www.aim-sportline.com
–
www.mychron4.com
14
System Setup: selecting this icon the related sub menu appears:
• Set Time/Date: set date and time format: 12 or 24h and
MM/DD/YY or YY/MM/DD or DD/MM/YY
• Predictive: enables/disables predictive lap time. Note: this
function is available only if split number is set on 1 and drive type
on direct drive (ICA,FA, etc). Like split, also predictive can be
enabled/disabled and can be shown as absolute or difference
mode.
• reverse: reverses MyChron4 menu background and text colours.
• System Information (shown below): shows logger name (1),
firmware version (2), logger serial number (3) and version (4) EU:
European - USA: American.
Pilot: selecting this icon the window shown below appears. It is associated
to each run, both in data recall on the display and in data analysis through
the PC.
Use the top right button to select a character, the arrow to delete it and the
floppy icon to save the pilot name.