AiM MyChron4 User manual - Manual (Page 13)

MyChron4
User Manual
Release 1.03
www.aim-sportline.com – www.mychron4.com 13
6.2 – Control panel or custom configuration
Selecting configuration icon a sub-menu appears:
Each icon allows the user to set different functions:
Clear test data: allows to delete data stored in MyChron4 memory.
RPM Setup: enters a sub-menu explained in the related paragraph
Set Temperature: allows the user to link temperature alarm threshold
value to one of MyChron4 lateral led and to set temperature unit of
measure.
Drive setup: as explained in configuration wizard paragraph this function
allows the user to set drive type and in case, kart gears number (accepted
values from 2 to 6).
Lap / split Setup: selecting this icon the related sub-menu appears:
• Total magnetic strips: allows the user to set the number of
magnetic strips /optical transmitters installed on the track.
• Split mode: allows the user to show split as absolute value
(actual) or as difference in respect of best lap (+/- best)
• Start line number: in case of a track with more than one optical
transmitter/magnetic strip it is required to set the one used as
reference for lap time.