Prefixes – 2N VoiceBlue Next v3.5 User Manual

Page 56

Prefixes

The window helps you adapt the gateway to calling to variable GSM networks. You can
set the prefix-based call routing rules here and identify up to eight different groups for
routing.

Prefix list 1–8

Eight prefix groups to be assigned in the LCR table.

Basic settings

GSM network ID – name the prefix list for convenience.
Default count of digits – the default length of the number to be dialled into
GSM/UMTS when routing via the selected prefix list. Use this parameter if the

parameter is not included in the

table.

Digits count

Accepted prefixes

Table of replaced prefixes

This table helps you change the prefix of the number received (from 00 to +, e.g.). You
can just add or remove a prefix using this table. This change is performed before the
prefix table search is initiated. Keep the „"/ „" record at least in the table for a proper
function.

Table of accepted prefixes

A list of prefixes of called destinations to which the selected prefix list applies.

Note

The number to be dialled to the GSM/UMTS network must meet the

condition.

Count of digits
For

calls, the count of digits to be dialled must be equal to or higher

VoIP

than the value set in the

Count of digits

Note

The maximum count of records in the

is 14

Table of replaced prefixes

for each prefixlist.

The maximum table record size is 9 characters for the prefix and 9
characters for the replaced number.

Note

The maximum count of records in the

is 138

Table of accepted prefixes

for each prefixlist.

The maximum table record size is 9 characters.