2N VoiceBlue Next v3.5 User Manual
Page 55
55
Parameter
CLIP to VoIP/PRI
1
Note
Null
420261301500
No CLIP change
+
+420261301500
+ inserted before CLIP received
00
00420261301500 00 inserted before CLIP received
–
0261301500
First two digits removed from CLIP received
–––99
99261301500
First three digits removed from CLIP received, prefix
'99' added
Looping of voice message – set the voice message playing time.
Send CLIP from GSM/UMTS to VoIP
Transfer CLIP from GSM/UMTS – enable/disable the function.
Separating char – enter the character to separate the calling SIM card CLIP and
ID extension to be called.
Modify – modify the ID extension.
Others
Time to keep CLIP in table – set the time for which records are to be kept in the
AutoCLIP routing table.
Add record only for unconnected call – unconnected outdoing calls are stored in
the AutoCLIP table only.
Delete record for connected answer – if the CallBack is successful, the
corresponding AutoCLIP record will be deleted.
Skip DTMF for numbers not in CLIP Routing table – enable this function to define
that only the incoming calls whose CLIPs are stored in the CLIP Routing table will
be able to use DTMF dial-in.
Skip list of called numbers after failed call to wanted number – enable this
function to define that the incoming call will not be forwarded to the number(s)
included in the List of called numbers in case the call is rejected after the
preceding DMTF dial-in.
Auto end to CallBack request – any incoming call whose CLIP matches the
CallBack setting will be rejected and all the other incoming calls will be ignored.
In either case, the CallBack function will be invoked after the incoming call ends.
List of called numbers
List of numbers to be dialled if DTMF dial-in was not made. Search the table from top
to bottom. If the called user is inaccessible, use the following table record
.
Caution
The
service must be supported by the
Send CLIP from VoIP to GSM
GSM/UMTS provider. If not, not, the provider's network may reject the
call!