2N VoiceBlue Next v3.5 User Manual

Page 52

Send CLIP from VoIP to GSM/UMTS

Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – the CDN/CLIP separating character.
Modify (" removes one digit) – you can change the CLIP. The "– character is used
for deleting one char from the left.

GPRS activation

APN string

define the Access Point Name (APN) for GPRS connectivity.

–

Basic settings

Roaming enabled for network code – set the international network identifier for
roaming purposes consisting of the following two codes:

MCC – Mobile Country Code – country code (Czech Republic – 230);
MNC – Mobile Network Code – GSM code (T-Mobile – 01, 0202, Vodafone –
03).

Hence, the international identification code for T-Mobile CZ is 23001. Leave this field
empty to disable roaming.

String

Note

Roaming is disabled

2300

Roaming is disabled (5 digits is the minimum count)

23002

Roaming is enabled for networks with MCC+MNC code 23002

230XX

Roaming is enabled for networks with MCC+MNC codes 23000 – 23099

XX001

Roaming is enabled for networks with MCC+MNC codes 00001 – 99001

XXXXX

Roaming is enabled for any network

CLIR – fill in this parameter to define whether or not the called subscriber should
be displayed the calling SIM card telephone number. It is recommended that the
telephone number of the SIM card inserted in the GSM module should not be
displayed to the called subscriber to avoid problems with CallBack from GSM.

Caution

The

service must be supported by the

Send CLIP from VoIP to GSM

GSM/UMTS provider. If not, the provider's network may reject the call!

Note

Check the GSM/UMTS searching priorities on the SIM card using your
mobile phone before enabling roaming.

Caution

Calls via a roaming network may increase you telephone bill!