Begincall, Answercall, Action.begincall – 2N Helios IP Automation Manual v2.7 User Manual
Page 21: Action.answercall, Parameters, Example
21
Action.BeginCall
The
block defines the action necessary for establishing of an outgoing call to
BeginCall
the defined telephone number, SIP URI or user number included in the intercom phone
book.
Parameters
Event – define the event to launch the action.
Condition – define the condition to be met to execute the action. This parameter
is optional.
Number – define the phone number to be called.
Uri – define the SIP URI to be called: sip:user@domain
User – define the phone book number to be called. The valid values are 1
through 999 (depending on the intercom model).
Enter just one of the above mentioned parameters (
,
or
).
Number Uri
User
Example
Establish an outgoing call if the event defined on row 2 arises:
Action.BeginCall: Number=1001; Event=2
Action.AnswerCall
The
block defines the action necessary for answering of an incoming call.
AnswerCall
In case no call is coming or the incoming call is not ringing, the action will not initiate
any activity.
Parameters
Event – define the event to launch the action.
Condition – define the condition to be met to execute the action. This parameter
is optional.
Example
Answer a call if the event defined on row 2 arises:
Action.AnswerCall: Event=2