2N BRI Lite/Enterprise v1.4 User Manual

Page 66

Caution

The BTS lock service work with specific GSM modules only (Q55)!
If you set a wrong BTS lock, the selected GSM module(s) will not log
in to GSM.

After call relax delay – set the time between the end of the current call and start
of the next call via one and the same GSM/UMTS module. The recommended
value for heavy–traffic installations is 2 seconds!
Add random time – use this auxiliary parameter to add random time in seconds.
Thus, the resultant time is the sum of the two above mentioned parameters.

Disconnect call

Set the reasons for immediate discontinuation of an outgoing call to GSM/UMTS.

Send CLIP from VoIP to GSM/UMTS

Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – define the CDN/CLIP separating character.
Modify (‘–’ remove one digit) – change the CLIP. The ‘–’ character is used for
deleting one character from the left.

Caution

The

service must be supported by the

Send CLIP from VoIP to GSM

GSM/UMTS provider's network. Otherwise, the call may be rejected by
GSM/UMTS!

Basic settings

Roaming enabled for network code – international code for the roaming enabled
network. The code consists of the following two numbers:

MCC – Mobile Country Code – national code (Czech Republic – 230, e.g.)
MNC – Mobile Network Code – GSM network code (T–Mobile 01, O202,
Vodafone 03, e.g.)

Hence, the T–Mobile CZ international code is 23001. Leave the field empty to disable
roaming.

String

Note

Roaming disabled

2300

Roaming disabled (five digits at least)

23002

Roaming enabled for the 23002 (MCC+MNC) network

230XX

Roaming enabled for the 23000 – 23099 (MCC+MNC) network

XX001

Roaming enabled for the 00001 – 99001 (MCC+MNC) network

XXXXX

Roaming enabled for any network