Login configuration, Web configuration, Report configuration – 2N StarGate/BlueTower v5.6 User Manual
Page 90
90
– primary DNS server.
DNS server1
– secondary DNS server. Used as a back-up when DNS server 1 is
DNS server2
not functional.
Login Configuration
The window helps you set the access password and name for the 2N
StarGate /
®
web interface. Use the same data for Telnet connection too.
BlueTower
Web Configuration
Set additional parameters for the gateway web interface.
Auto logout – set the count of minutes in which the current user should be
logged out automatically.
Enable web session lock – by default, one Admin user may only be connected
to the GSM gateway at a moment. If another authorised user tries to log in, the
previous session will be aborted automatically. By activating this function you
disable such automatic logout and block any further access attempts.
Simple login form – here you can change the login window graphic lay–out.
Upon activation, the GSM gateway login page will have an anonymous
appearance. This function is recommended for connecting the gateway to the
Internet directly.
Use SMS user for SMS operations on the web – enable/disable the user
authorised for SMS sending/receiving only.
SMS user name/password – the gateway enables independent connection of a
user authorised for SMS receiving/sending only.
Report Configuration
This window is used for setting details on automatic tracing generated by the GSM
gateway.
Caution
Incorrect settings, e.g. enabling the
, may result in a
DHCP client service
denial of access to the
configuration. To
2N
StarGate / BlueTower
®
avoid this, restore the GSM gateway default settings. Refer to Subs.
for details Jumper pro default.
Tip
In case the gateway is in the DHCP client mode, current assignments
obtained from the DHCP server are displayed in the IP address, Subnet
and Default gateway items.
mask
Caution
Remember to change the username and password during the first
gateway configuration to avoid unauthorised access!