Gateway configuration, System parameters – 2N StarGate/BlueTower v5.6 User Manual

Page 71

Gateway Configuration

System Parameters

General

Saving call data (CDR) – select the call types on which records are to be saved
into the CDR file.
Gateway ID – identifies

numerically in the CDR in

StarGate / BlueTower

case multiple devices generate the CDR in the network.
General selection of SIM – cards Selection of the SIM card holder to be used
by the gateway. This parameter has no influence on the gateways connected to
the

system.

2N SIM Star

According to GSM groups – the SIM card is selected according to the
settings of the Outgoing GSM group to which the wireless module is
assigned.
SIM card in slot # – hardware selection of the SIM card holder position.
This setting overrides the Outgoing GSM group setting!

Number for remote control (PRI 1, PRI 2) – The remote control number for a
date call via the B-channel of the ISDN PRI 1 or PRI 2 interfaces.

Automatic Logout of GSM Modules

This function is used for automatic logout of wireless modules from the wireless
network in a selected time interval. If the logged-in modules are occupied by a call, the
logged–out modules log in automatically. If the traffic drops, the modules log out again
from the network at random intervals.

Enable automatic logout – enable/disable the feature.
Logout hour – set the time interval for the wireless modules to start logging out
randomly from the wireless network.
Login hour – set the time interval for the wireless modules to start logging in
back to the wireless network.
Min. logged-in modules – set the minimum count of wireless modules that
remain logged-in.

Summer / Winter Time

Automatically switch to summer/winter time – enable an automatic change
of the gateway system time at the time of transition to/from the daylight saving
time.
Date of switch to winter time [dd.mm] – transition day and month.
Date of switch to summer time [dd.mm] – transition day and month.

System Restart

enable/disable the feature.

Enable system restart –

– set the time for system restart.

Time of system restart [hh:mm]