2N StarGate/BlueTower v5.6 User Manual

Page 84

CLIR – enable/disable presentation of the SIM CLIP on the called party’s
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.

Maximum number of called minutes – define the maximum count of minutes
to be called within a month via the selected SIM card.

Count of SMS messages – define the maximum count of SMS messages to be
sent within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on
which the Max count of called minutes and Count of SMS messages statistics
shall be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the Next count parameter.
Next count – set the length of one pulse in seconds after the time defined in the
First count parameter elapses.

Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.

– set the interval to send AOC messages

AOC sending interval

Time Limits

There are two SIM use time limits in a GSM group.

Call tariffs – use this function to assign up to four independent free minute counters
to a group of GSM modules (SIM cards), e.g.:

Tariff 1 = free minutes for calls to own GSM/UMTS network.
Tariff 2 = free minutes for calls to other GSM/UMTS networks.
Tariff 3 = free minutes for calls to fixed network.
Tariff 4 = free minutes for calls within a closed user group (VPN).

Complete the LCR table (assign prefixes to tariffs) properly to make full use of this
function. If routing to a tariff is not used, the global free minutes function will be used
in the LCR table.

Free minutes – set the free minutes for the tariff offered by the provider.
Transferred minutes – set the maximum count of free minutes to be
transferred to the next period.

– set the interval to send AOC messages.

AOC sending interval
Day of restoring free minutes – set a day on which the free minute counters
will be reset automatically. Select every 24 hours, a day in a month, or a day in a
week.
Week of restoring free minutes in month – set a week in which the free

Caution

The

and

services

Temporary CLIP enable

Temporary CLIR enable

must be supported by the GSM/UMTS provider’s network. Otherwise, the
call may be rejected by GSM/UMTS!

Note

Set the two parameters above (

) properly to

First count, Next count

count free minutes on SIM cards correctly. These parameters are used for
limiting outgoing calls depending on free minutes. The CDRs contain real
data.