2N OfficeRoute - User Manual - Manual (Page 24)

2N OfficeRoute
www.2n.cz
24
Telephony services: Devices (SIP, H.323, DISA lines)
management,
GSM incoming routing settings
(Operator/DISA), LCR settings.
Administration: Main settings, Time and Timezone
settings,
Firmware upgrade, Licence upload,
Configuration back-up/restore.
States&Logs: States of Devices and calls, Logs for
debugging/troubleshooting, CDR.
SMS: SMS delivery settings (web and SMTP/POP3),
SMS sending web portal.
There is just basic survey of menus. Individual types of
forms, their meanings and options will be discussed
later.
4 Network settings
Main settings: OfficeRoute’s own IP address, mask,
default gateway and DNS. There is also a possibility to
switch on DHCP client (when OfficeRoute doesn’t
serve as a DHCP server and there is another DHCP
server in the network). It is also possible to set Main
settings via serial console or via telnet console.
Filtering: Settings of embedded firewall. It is possible
to set rule for accepting/baring according type of traffic,
source or destination IP address or port.
Port mapping: NATP setting for access devices in an
internal LAN via UMTS network (public IP must be
assigned to OfficeRoute by an operator).
DHCP server: Settings for DHCP server in case that
OfficeRoute serves as LAN DHCP server.