2N EasyGate - User Manual - Manual (Page 8)

3
2.2. External Antenna Connection
Screw the antenna enclosed into the SMA antenna connector. Tighten the antenna
connector gently with your hand - never use wrenches!
The antenna enclosed has a sufficient gain for trouble-free operation in normal
conditions. If the GSM signal is poor or you want to place your antenna separately from
EasyGate, you can use an antenna with an SMA-connector terminated cable. The
antenna should be mounted vertically.
The Antenna shall be located within the same building as the main equipment.
For antenna and cable parameters see the “Technical Parameters“.
2.3. SIM Card Installation
Make sure that the GSM provider’s SIM card is compatible with the GSM network
supported by your EasyGate version.
Open the SIM card holder on EasyGate’s backside, insert the SIM card and close it.
Select the required GSM provider and SIM card services, such as call forwarding, call
barring, preferred networks, SMS service centre, etc. in your mobile phone before
inserting your SIM card in EasyGate.